Solvent Finish Fire Behavior Blatepox Floors

Description

Description
Solvent-based epoxy finish, cured with modified polyamides. Properties Good adhesion, resistance to abrasion, and to chemical products (especially bases); good application, performance and coverage.

Applications
High quality epoxy paint, for coating industrial systems, such as parking lot floors, factories, warehouses, etc., on concrete and cement. Indoor use.

Technical Characteristics
· Color: Gray floors RAL 7038, Green floors RAL 6021 and Red floors RAL 3009.
· Appearance: Gloss.
· Density: 1.30 ± 0.25 (UNE-EN-ISO 2811-1 and 2).
· Solids by volume: 50 ± 2%.
· Drying (touch): 2-4 hours.
· Repainting: Minimum: 12 hours / Maximum: 15 days.
· Flash point: 26ºC.
· Recommended thickness: Wet: 60-100 microns / Dry: 30-50 microns.
· Yield: 12.5 m 2 /kg (40 microns). Data for mixed product at 25ºC.
· Number of layers: 1-2.
· Mixing ratio: Weight: 100/33 / Volume: 100/50.
· Catalyst: Blatepox Soils Catalyst, Blatepox Soils Catalyst E 1 or Blatepox AD Catalyst.
· Mix life: 8 hours.
· Stability in the container (cool and dry place; 15-30ºC, rh-60%): More than 1 year in original closed container. VOC: 2004/42/II A(j)(550/500) Max. COVS 400 g/Lt.

Approvals and tests
Water permeability (CE marking) W < 0.1 Kg/m2 h0.5. Obtained value: W= 0.03 Kg/m2 h0.5 (EN 1062-3:2005). Water vapor permeability (CE Marking) Class ISD Value obtained: SD = 1.2 m (EN-ISO 7783-1/2). Peel-off adhesion (CE Marking) ≥ 1.0 (0.7) b. Obtained value: 2.97 ± 0.60 MPa (UNE 1542:2000). Abrasion resistance (TABER test) (CE marking). Weight losses less than 3000 mg, H22 grinding wheel / rotation 1000 cycles / load 1000 g. Obtained value: 126 ± 24 mg (EN-ISO 5470-1). Impact resistance (CE Marking) Class II (≥ 10 Nm). Obtained value: ≥ 10 Nm (EN-ISO 6272-1). Resistance to strong chemical attacks (CE Marking). Decrease in hardness by less than 50%, when the measurement is carried out according to the Buchholz method EN-ISO 2815, or according to the Shore method, EN-ISO 868, 24 hours after removing the coating by immersion in the test liquid . Value obtained: Class II (28 days without pressure) for the following test liquids: – Group 1 (gasoline). – Group 3 (diesel and unused engine and gear oil). – Group 11 (inorganic bases and their hydrolyzing alkaline salts in aqueous solution (pH>8) except for ammonium solutions and oxidizing solutions of salts). Slipperiness (UNE-ENV 12633). Slip resistance Rd>45: Class 3. Fire classification of pavements (UNE-EN 13501:07+A1:2010): Fire behavior: A2 fl. Smoke production: S1.

Surface preparation
Apply over epoxy or polyurethane primer, epoxy or vinyl shop-primer. On old epoxy or polyurethane paints, it is recommended to previously give a slight roughness.

Instructions for use
Air gun: 25-30” CF4 (nozzle 1.5-2 m/m, 3-4 atms). Airless gun: As is (0.018”, 120 atms). Brush/roller: 0-10% Blatepox Solvent. Application conditions: Temperature ≥12ºC / humidity ≤80%. Diluent: Solvent 333 or Blatepox Solvent. Cleaning Solvent: Cleaning Solvent L or 330.

Recommendations
Stir the contents of the containers and the mixture of the two components, until the product is homogeneous; Do not store opened or started containers. Consult the safety sheets for toxicological data.

Presentation
In containers of 4 (3+1) and 20 (15+5) Kg. Colors: Gray floors RAL 7038, Green floors RAL 6021 and Red floors RAL 3009.

Storage
Maximum recommended storage time: 1 year in its original container, well closed and protected from the elements (covered and at a temperature between 5 and 35ºC.)

Safety Information
If applied with a spray gun, it is advisable to use a mask. In case of contact with eyes, wash with plenty of clean water. For more information consult the product safety sheet.

Reviews

There are no reviews yet.

Be the first to review “Solvent Finish Fire Behavior Blatepox Floors”