Satin Varnilac Approved Polyurethane Lacquer Varnish

Description

Description
Polyurethane lacquer with silk satin finish for interiors and for exteriors on covered surfaces.

Properties
Excellent hardness, performance and ease of application.
It has a satin finish with a luxury lacquer look,
it is washable, colourless, elastic and transparent, offering
great resistance to friction, scratches, cleaning products, liquor stains, etc.

Applications
For the varnishing of all types of wooden surfaces in covered interiors and exteriors, such as furniture, doors, cupboards etc.

Technical characteristics
· Finish: Satin.
· Leveling: Excellent.
· Adhesion: Good.
· Broaching: Good.
· Drying: 2 h 45′ ± 1 hour at 25 ± 8ºC.
· Repainting: 18 – 24 hours.
· Viscosity: 120 ± 35” F-4 (Ford Cup no. 4) at 25 ± 8oC (ASTM D-1200). Density: 0.95 ±
0.10 gr/cc (UNE-EN-ISO 2811-1 and 2).
· Performance: 13 – 16 m2/lt.
· Hardness: Excellent.
· Rubbing resistance: Excellent.
· Stability in packaging: More than a year in original sealed packaging. Tools: Cleaning with
Solvent for Enamels, Cleaning Solvent or Universal Solvent.

Approvals and Tests
Approval: Reaction to fire, standard UNE-EN 13501-1:07+A1:2010, European classes:
B, S2, d0.

Surface Preparation
· New wood: After the wood is dry, sand it well and remove the dust.
· Varnished wood: If the varnish is in good condition, gently peel and remove the dust. If the varnish is in bad condition, remove it with rails and proceed as with
new wood.

Use
· New wood in interiors: Apply one coat of our Aquafond (tapaporus) or our
Polyuretà Fons 799 (polyurethane tapaporus) to seal the wood. Then
apply two coats of Barnilac. Product ready to use.
· New exterior wood not exposed to the sun or rain: Apply one coat of our
Polyurethane Foundation 799 (polyurethane capping) to seal the wood. Then apply two
coats of Barnilac as in wood for interiors.
· Varnished wood in good condition: Once peeled and clean, apply two coats of Barnilac on reheated surfaces as in the previous cases.
· Varnished wood in poor condition: Once stripped and clean, proceed as with
new wood. Apply the product in thin layers and respecting the repainting times.

Recommendations
Do not apply on heated surfaces.
Stir the contents of the container until the product is homogeneous.
After use, cover the container trying to leave little air space, if it will take
a long time to use again.

Presentation
Available in sizes 250 ml, 750 ml and 4 liters.

Storage
Maximum recommended storage time: 12 months in its original container well
closed and sheltered from the weather (covered and temperature between 5 and 35ºC).

Safety information
It is essential to follow the instructions on the package label. For more information
consult the product safety sheet.

Reviews

There are no reviews yet.

Be the first to review “Satin Varnilac Approved Polyurethane Lacquer Varnish”