Blatprimer Flame Retardant Antioxidant paint

Description

Description
Flame retardant anticorrosive primer with high drying speed for use on iron surfaces.

Properties
Very fast drying, good anti-corrosive power and ease of application, as well as high performance and coverage.

Applications
For the protection against oxidation of all kinds of iron surfaces, gratings, windows, doors, structures, etc… both in the workshop and on site.

Technical characteristics
· Color: Grey.
· Anticorrosive effectiveness: Good (in moderate urban and industrial environments).
· Adhesion: Good.
Touch drying: 15 ± 7 minutes at 25 ± 8oC.
· Repainting: Between 2-4 hours.
· Viscosity: 160 ± 30” F-4 (Ford cup no. 4) at 25 ± 8oC (ASTM D-1200).
· Density: 1.44 ± 0.15 gr/cc (UNE-EN-ISO 2811-1 and 2).
· Fineness: 6.5 ± 1 HG (Hegman degrees) (UNE-EN-ISO 1524).
· Yield: 5-7 m2/kg.
· Stability in packaging: More than 1 year in original sealed packaging.
· Utensils: Cleaning with Cleaning Solvent or Universal Solvent.

Approvals and Tests
Reaction to fire, standard UNE-EN 13501-1:07+A1:2010, European classes: A2, S1, d0.
Surface Preparation
Clean and degrease the surface well, remove poorly adhered paints and brush off
rust spots or rusted parts, until shiny iron is obtained (st.2).

How to use
Reduce with our Universal Solvent to spray viscosity. It must
be applied with a gun, leaving the distribution uniform.
on these primers you must apply our synthetic finishing enamels
such as Blatemlux, Pintaluz, etc.

Recommendations
Stir the contents of the container until the product is homogeneous.
After use, close the container, trying to leave little air space if it takes time
to use again.

Presentation
In containers of 5 and 20 kg.

Storage
Maximum recommended storage time: 12 months in its original container well
closed and sheltered from the weather (covered and temperature between 5 and 35ºC).

Safety information
It is essential to follow the instructions on the package label. For more information
consult the product safety sheet.