Inesfire TIX White 422 HY Intumescent

Description

Description

Pintura intumescente retardadora del fuego.

Properties

The paint forms an insulating layer between the support and the fire, producing a set of physical-chemical reactions that give rise to carboniferous and insulating structures by exposing a material to the flame.

Applications

For protection of metal structures, in hotels, public buildings, pubs, discos, ship habitat areas, industrial warehouses. In the case of outdoor applications, it is necessary to coat the Inesfire TIX HY with a finishing layer, preferably our Satin Fireproof Blatemlac.

Technical Characteristics

· Finish: Matte white.
· Leveling: Excellent.
· Adhesion: Good.
· Non-volatile: 72 ± 3%.
· Solids by volume: 60 ± 2%. Drying: 2 hours.
· Repainting: 18 – 24 hours.
· Density: 1.25 ± 0.1 gr/cc (UNE-EN-ISO 2811-1 and 2).
· Performance: According to the necessary fire resistance (see catalogue). Hardness: Excellent.
· Stability in packaging: More than one year in original closed packaging.
· Utensil cleaning: Cleaning Solvent L.

Approvals and Tests

Fire stability according to EN 13381-8 standard.

Surface Preparation

Iron and steel: before priming, perform manual or mechanical cleaning up to grade ST 2-2.5. Metal surfaces must be previously primed with Antioxidant Fireproof Blatprimer, a certified fireproof classification product according to UNE-EN 13501- 1:07+A1:2010, European classes.

How to use

Airless gun, airmix gun, airbrush: Inesfire solvent: 0-40% depending on the type of gun.

General remarks

The consumption indicated per m2 is theoretical. The losses must be calculated on it. All intumescent paints have official certifications for fire resistance over time, and there is a table that relates fire resistance to the variables time, thickness, load and consumption. · New wood outdoors not exposed to the sun or rain: Apply a coat of our Poliurethane Fondo 799 (polyurethane filler) to seal the wood. Then apply two coats of Varnilac as on interior wood. · Varnished wood in good condition: Once sanded and cleaned, apply two coats of Varnilac to reheated surfaces as in the previous cases. · Varnished wood in poor condition: Once stripped and cleaned, proceed as with new wood. Apply the product in thin layers and respecting the repainting times.

recommendations

Do not apply to overheated surfaces. Stir the contents of the container until the product is homogenized. After use, cover the container, trying to leave little air space, otherwise it will take a long time to use again. Presentation In 4 L and 15 L containers. Storage Maximum recommended storage time: 12 months in its original container, well closed and protected from the elements (covered and at a temperature between 5 and 35ºC).

Safety information

It is essential to follow the instructions on the container label. For more information consult the product safety sheet.