Blatepox floors WD/3 Epoxy Paint Aqueous Dispersion

Description

Description

Epoxy finishing paint in aqueous dispersion. Indoor use.

Properties

High resistance to abrasion. Alkalinity resistance. Excellent adhesion. The end of the mixture is visible.

Applications

Protection and decoration of concrete floors, subjected to mechanical stress, such as garages, warehouses, industrial warehouses, etc.

Technical Characteristics

· Color: Red RAL 3009, Green RAL 6021, Gray RAL 7038 and White.
· Appearance: Satin.
· Density: 1.64 ± 0.1 gr/cc (UNE-EN-ISO 2811-1 and 2).
· Solids by volume: 50 ± 2%.
· Drying (touch): 6-8 hours.
· Repainting: Minimum 8 hours / Maximum 3 days.
· Non-flammable.
· Recommended thickness: Wet 60-120 microns / Dry 30-60 microns.
· Performance: 6-8 m 2 / lt (50 microns).
· Data for mixed product at 25ºC.
· Number of layers: 1-2.
· Mixing ratio: Weight: 4 / 1. / Volume: 2.44 / 1.
· Catalyst: Blatepox WD/3 catalyst.
· Mix life: 1 hour.
· Stability in the container (cool and dry place; 15-30ºC, RH-60%): More than 1 year in original closed container. VOC: 2004/42/II A(j)(140/140) Max. COVS 71 g/Lt.

Approvals and Tests

Water permeability (CE Marking) W < 0.1 Kg/m2 h0.5. Obtained value: W= 0.05 Kg/m2 h0.5 (EN 1062-3:2005). Water vapor permeability (CE Marking) ISD Class. Obtained value: SD = 1.2 m (EN-ISO 7783-1/2). Peel-off adhesion (CE Marking) ≥ 1.0 (0.7) b. Obtained value: 4.18 ± 0.22 MPa (UNE 1542:2000). Abrasion resistance (TABER test) (CE marking). Weight losses less than 3000 mg, H22 grinding wheel / rotation 1000 cycles / load 1000 g. Obtained value: 138 ± 31 mg (EN-ISO 5470-1). Impact resistance (CE Marking) Class I (≥ 4 Nm). Obtained value: ≥ 4 Nm (EN-ISO 6272-1). Resistance to strong chemical attacks (CE Marking). Decrease in hardness by less than 50%, when the measurement is carried out according to the Buchholz method EN-ISO 2815, or according to the Shore method, EN-ISO 868, 24 hours after removing the coating by immersion in the test liquid . Value obtained: Class II (28 days without pressure) for the following test liquids: – Group 1 (gasoline). – Group 3 (diesel and unused engine and gear oil). – Group 11 (inorganic bases and their hydrolyzing alkaline salts in aqueous solution (pH>8) except for ammonium solutions and oxidizing solutions of salts). Slipperiness (UNE-ENV 12633). Slip resistance Rd>45: Class 3. Fire classification of pavements (UNE-EN 13501:07+A1:2010): Fire behavior: A2 fl. Smoke production: S1.

Surface Preparation

Concrete: Apply over colorless or pigmented epoxy primers, whether sol-vent or aqueous-based.

How to use

Air gun: As is, nozzle 1.5-2 m/m, 3-4 atms). Diluent: Water. Brush/roller: 0-10% with water. Cleaning solvent: Water. Application conditions: Temperature ≥ 12ºC / humidity ≤ 80%.

recommendations

Stir the contents of the containers and the mixture of the two components, until the product is homogeneous; Do not store opened or started containers. Consult the safety sheets for toxicological data.

Presentation

In containers of 10 (8+2) Kg. Colors: Gray RAL 7038, Green RAL 6021, Red RAL 3009 and White. Storage Maximum recommended storage time: 1 year in its original container, well closed and protected from the elements (covered and at a temperature between 5 and 35ºC.)

Safety information

If applied with a spray gun, it is advisable to use a mask. In case of contact with eyes, wash with plenty of clean water. For more information consult the product safety sheet.